Frank – [OLD SEMESTER] 15-104 • Introduction to Computing for Creative Practice https://courses.ideate.cmu.edu/15-104/f2022 Professor Tom Cortina • Fall 2022 • Introduction to Computing for Creative Practice Sun, 25 Sep 2022 04:08:56 +0000 en-US hourly 1 https://wordpress.org/?v=6.0.8 Project-04 https://courses.ideate.cmu.edu/15-104/f2022/2022/09/25/project-04-4/ https://courses.ideate.cmu.edu/15-104/f2022/2022/09/25/project-04-4/#respond Sun, 25 Sep 2022 04:08:26 +0000 https://courses.ideate.cmu.edu/15-104/f2022/?p=72997
line art frank

var numLines = 30

function setup() {
    createCanvas(300, 400);
    background(220);
   
}


function draw() {

//top rock thing
    eastern(150,0,0,0, 0,0,0,50, 20)        //left top 
    eastern(150,0,300,0, 300,0,300,50, 20)      //left bottom
    eastern(0,50,0,100, 0,100,150,100, 20)      //right top
    eastern(300,50,300,100, 300,100,150,100, 20)        //right bottom
//middle rock thing

    eastern(150,100,-150,150, -150,150,150,200, 20) //left
    eastern(150,100,450,150, 450,150,150,200, 20)

//bottom rock thin
    eastern(0,200,150,200, 0,300,0,200, 20) //top left
    eastern(0,300,0,400, 0,400,150,400, 20) // bottom left
    eastern(150,200,300,200, 300,200,300,300, 20)           // top right
    eastern(150,400,300,400, 300,400,300,300, 20)           // bottom right


//middle traingle thing
eastern(0,300,300,300, 150,0,150,200, 4)
eastern(300,300,0,300, 150,0,150,200, 4)
eastern(300,300,0,300, 150,0,150,0, 3)
eastern(0,400,300,400, 300,0,0,0, 2)

}

function eastern(X1, Y1, X2, Y2, X3, Y3, X4, Y4, numLines) {

line(X1, Y1, X2, Y2) 
line(X3, Y3, X4, Y4)

    var dx1 = (X2 - X1)/numLines
    var dy1 = (Y2 - Y1)/numLines
    var dx2 = (X4 - X3)/numLines
    var dy2 = (Y4 - Y3)/numLines


    for ( var i = 0; i <= numLines; i ++) {
        line(X1, Y1, X3, Y3);
        X1 += dx1
        Y1 += dy1
        X3 += dx2
        Y3 += dy2
    }


}


]]>
https://courses.ideate.cmu.edu/15-104/f2022/2022/09/25/project-04-4/feed/ 0
Looking Outward-04 https://courses.ideate.cmu.edu/15-104/f2022/2022/09/25/looking-outward-04/ https://courses.ideate.cmu.edu/15-104/f2022/2022/09/25/looking-outward-04/#respond Sun, 25 Sep 2022 04:01:33 +0000 https://courses.ideate.cmu.edu/15-104/f2022/?p=72990 Continue reading "Looking Outward-04"]]>

Francesco Mauro

Section D

I looked into the music of Robert Henke, and enjoyed it. The music has a wide dramatic sound, and invokes some sort of primal feeling. It feels immersive and vast. One of his songs sounded like you were standing on the edge of that one cavern from planet earth looking down. He is a minimalist from Germany, and it matches well with his computational music making. The absolute minimalism makes me feel like I’m listening for the truth within each sound. The control he obviously has on each sound allows slight movements to feel like massive musical sweeps. He speaks about his creation involving a tweaking and tuning of algorithms looking for patterns that are pleasing. Looking for an unexpected effect within the rigid parameters. A very approachable method.

]]>
https://courses.ideate.cmu.edu/15-104/f2022/2022/09/25/looking-outward-04/feed/ 0
LO: Art and industry https://courses.ideate.cmu.edu/15-104/f2022/2022/09/06/lo-art-and-industry/ https://courses.ideate.cmu.edu/15-104/f2022/2022/09/06/lo-art-and-industry/#respond Wed, 07 Sep 2022 00:17:16 +0000 https://courses.ideate.cmu.edu/15-104/f2022/?p=70159 Continue reading "LO: Art and industry"]]>

I saw a project testing done by an Italian startup company, called Wasp, designing and making 3D printed houses. It stood out t0 me for several reasons. First the promise of affordable housing due to the fact that much of the labor is done computationally. Secondly, it was much more aesthetically pleasing to me than other 3d printed house prototypes I had seen. 3D printed houses have some obvious characteristics, like the layering for example, and many see them as a drawback. Wasp, rather than disguising the fact that it was 3d printed, designed a house that complimented the characteristics of the process. A design that took advantage of the more unusual, non-rectilinear forms you can afford to create when the labor is computationally driven, and was allegedly inspired by mason wasp nests. A great example of working well within the constraints given, like we have the opportunity to do when making art using js draw.  

The original creators were a designer daughter and electrical technician father who were inspired when messing around with 3d printers. They got their start by adapting the technology of plastic 3d printers to a different extruder that could be used with clay. They made and sold ceramics this way. Developing the technique to print a full house took 9 years.  

While the project probably did involve some custom software, I did not find any specific mention of it.  I did see that they were using grasshopper, a fairly common program for architects. I was originally exposed to the project on youtube at: https://www.youtube.com/watch?v=4MLJs1KRa0Y

3D printed house made by WASP
]]>
https://courses.ideate.cmu.edu/15-104/f2022/2022/09/06/lo-art-and-industry/feed/ 0