10.14. Design Example: Cam-Action Tubing Clamp

../_images/tubing-clamp.png

General-purpose adapter which can cam-lock onto a round tube. Available in several sizes for different lighting-stand section diameters.

This example is a demonstration of using a cam to act as a clamp. It also provides a functional design for an adapter plate to lock onto round tubing. The available sizes have been chosed to be compatible with the various tubing diameters within the Turtle Base C-Stands we use in the HLA10A Media Lab.. This may be useful as a light anchor, gobo mount, motor mount, etc. within the studio.

The cam is duplicated on both sides of the grid plate to provide symmetric forces. The curved cam surface is shaped to provide a steadily increasing radius as the handles are compressed. This squeezes the tube into the circular cavity of the grid plate. The shallow cam slope keeps the tubing friction forces within the limits of the contact friction for a passive frictional lock. The other end of the cam is designed to allow the tube to fit through the full opening so the device can be slipped around a tube at any point without inserting from the end. A screw is used as a shaft for the handle, with two nuts tightened against each other to leave handles loose.

plate cam

One the left is the basic grid plate with a round cavity sized for a particular tube diameter. On the right is the common cam lever part with cam surface and handle, two needed per clamp.

The SolidWorks model files and individual DXF cutting files may be found in the FlatPackExample/Tubing-Clamp folder, or may be downloaded as a single file as Tubing-Clamp.zip.