{"id":1838,"date":"2020-11-10T18:15:16","date_gmt":"2020-11-10T23:15:16","guid":{"rendered":"https:\/\/courses.ideate.cmu.edu\/48-339\/f2020\/?p=1838"},"modified":"2020-11-13T01:23:06","modified_gmt":"2020-11-13T06:23:06","slug":"dont-trip-on-whats-in-front-of-you","status":"publish","type":"post","link":"https:\/\/courses.ideate.cmu.edu\/48-339\/f2020\/?p=1838","title":{"rendered":"Don’t trip on what’s in front of you!"},"content":{"rendered":"

Problem:<\/strong><\/p>\n

People often trip over small objects that are in their path that they may not be expecting, especially if the object isn’t very tall. This is because the object is well below their sight line unless they are looking towards the ground. If someone’s on their phone, they are also more likely to trip over a small object. Blind people also of course have to be able to navigate around things that they cannot see. While they have a cane that will help them to know if something is in front of them by it hitting it, but sounds to notify something within a stride could be helpful.<\/p>\n

Proposed Solution:<\/strong><\/p>\n

To help people with this problem, I propose a small wearable device strapped to the ankle that will buzz at different intervals based on how far an object is. This device is made up of a servo motor, ultrasonic distance sensor, accelerometer, and pancake vibration motor. The servo, distance sensor, and accelerometer are all attached. The servo moves such that the accelerometer is level so that the distance sensor is pointed straight ahead. This is important because as you walk, your leg is at various angles and doesn’t stay vertical. The buzzing from the vibration motor is a good way to know how far you are from something because the sound is pretty distinctive and has the added bonus of being able to feel it on your leg. For an actual version of this, I would package this smaller so that it could be actually something small attached to your leg that isn’t cumbersome.\u00a0 This would go on both ankles so that you’d know if something was in your path for sure and not just on one side. I’d also use a bigger vibration motor so that the sound is a bit louder; with this, I could feel it and hear it fine, but if the house was louder, it would’ve been harder to hear. I also wish that I had soldered the leads of the vibration motor while I was in A10 because the wire kept coming loose while trying to take videos of me walking and I’d have to bend down to fix it and then when I stood up, it would come loose again; along the same vein, I wish I had been recording the whole time because a really good example while walking with the all different buzzing intervals happened when I forgot to restart it.<\/p>\n

Proof of Concept:<\/strong><\/p>\n

\n