Posted on

NVCloud: Submission & Review

After adjusting your Print Settings, you should submit your file, then review relevant print job details. After which, IDeATe Technical Staff will review your file and follow-up accordingly!

Submission

After adjusting your Print Settings, submit your file by following these steps:

1. Copies
The COPIES setting is available from the Print Settings: General menu. COPIES affects the number of copies to be printed. If you plan on printing more than (1), adjust your desired quantity here.

 

2. Group
Near the bottom-left corner is your GROUP MENU. Selecting the arrow will expand this menu, allowing you to select which print group (and printer) the print should be sent to. The list is limited to print groups you’ve been invited to print from. *For more information on GROUPS, see NVBot: NVCloud Interface.

 

3. Submit
Submit your prepared print by selecting the SUBMIT button in the bottom-center of the NVCloud interface.

Review Process

After submitting your file, review relevant print job details to make sure all settings are correct and print cost is affordable.

1. Review: Approve Queue

After submitting a print job, your file is moved to the approve queue. Selecting the APPROVE tab will provide you with a list of 3D Prints waiting to be approved (ordered by submission time/date), with your recent submission included.

Immediately after submitting a print job, the right-most column of your print job listing, will indicate the file is ‘SLICING’. This process may take some time, as the toolpaths for the print job are being generated.
2. Review: Print Details

After the print job finishes the SLICING process, selecting the print job title or thumbnail will guide you to a new window with the print details. Review the following:

Estimated Filament/Cost: An estimate on the job’s filament usage is provided. Multiplying this number by IDeATe’s 3D Printing price, will provide you with an estimated cost for your print job. e.g. (IDeATe 3DPrint Price) x (Estimated Filament) = (Estimated Cost) Make sure you’re ok with the estimated cost!

i. *IDeATe 3D Print Pricing = $0.10/g (*Fall 2016 & Spring 2017)

ii. *Estimated Filament  = 40 grams (example only)

iii. Estimated Cost Example: ($0.10) x (40g) = $4.00

General Settings: Make sure the QUALITY, INFILL, UNITS, SUPPORT, ROTATION, SCALE and other miscellaneous settings are correct.
3. Review: Part Viewer – MODEL
From the left-menu, selecting the PART VIEWER option, will provide you with a preview of your print job geometry. This is the default MODEL view.
4. Review: Part Viewer – TOOLPATH
Selecting the TOOLPATH button, near the bottom-right of the screen, will present a visual representation of the toolpaths for your print job.
5. Review: Adjustments

If you find any errors with your print job, select the OPEN IN EDITOR button, from the bottom of the left menu. This will re-open the PRINT SETTINGS menu. From this menu, you can make any required adjustments to your print job, and re-submit.

*IMPORTANT: if you resubmit a print job with revised settings, your original print job will still exist in the approval queue! Revisit the APPROVE tab and delete any print jobs you do not want!

Approval Process

After you’ve reviewed your print job details, the job will remain in the approval queue until it is approved by IDeATe Faculty or Staff.

1. ORDER: Print jobs are approved on a first-come, first-served basis.

2. REVIEWERS: Print jobs may be reviewed and approved by IDeATe Technical Staff, Technical Advisors, Faculty, or Teaching Assistants.

3. WAIT TIME: Print jobs are approved in small batches. This eliminates any queue problems when a print job fails or if the printing equipment requires maintenance. It is normal for print jobs to remain in the approval queue for a short period of time (1-3 days) before being approved and moved to the print queue.

4. NOTIFICATION: *You will receive an email notification when your job is approved or denied. Please read the email, as it may include relevant notes or questions from the person who approved or denied your print. *If you aren’t receiving emails, you may need to adjust your personal notification settings (opens in new tab, login required).

Final Steps

After approval, your print job transitions to the print queue.

1. ORDER: Print jobs are completed on a first-come, first-served basis.

2. PRINT ERRORS: If a print job fails due to equipment failure, you are not charged. The equipment will be fixed, and your file will be resubmitted as first in the print queue.

3. PRINT FAILURES: If a print job fails due to file preparation or geometry errors, you are not charged for the first instance. You may resubmit your print job after reviewing the errors with your Instructor or IDeATe Technical Staff. Any print failures occurring after this review are charged to your student account.

4. NOTIFICATION: *You will receive an email notification when your job begins and completes. Additional notifications are sent if a print is stopped or fails. *If you aren’t receiving emails, you may need to adjust your personal notification settings (opens in new tab, login required).

5. RETRIEVAL: Your print job will be scraped from the print platform, and dropped into the bin on the right-side of the equipment. Open the equipment door and retrieve your print.

6. CONTACT: If you’re encountering issues or you have general questions that are not included in the NVBot Tutorials, please:

a. Ask your instructor! If he/she isn’t available, then….

b. Ask a friend! I’m sure one of them will know. If you don’t have any friends, or you’re friends don’t know, then….

c. Make some friends who do know! Ask an IDeATe Tech Advisor! They wear the blue shirts that say: “Tech Advisor”- usually available on weekdays 4:30-7:30pm.

d. Email us: HELP@ideate.cmu.edu

Posted on

NVCloud: Print Settings

NVCloud’s print settings allow you to prepare your geometry for printing. Print settings for new uploads are accessible immediately after uploading a Sterolithography [.stl] file. Print settings can also be accessed by selecting a previously uploaded, saved or printed file.

Quality

This option is available from the GENERAL print settings menu. QUALITY settings affect the layer height, overall surface finish and printing speed.

General: Quality

Fast = faster printing + 0.3mm (0.0118in) layer thickness. Use these settings if you’re in a rush or if part is a prototype.

Standard = slower printing + 0.2mm (0.008in) layer thickness. Use these settings for organic shapes or finer detailed printing.

Strength

This option is available from the GENERAL print settings menu. STRENGTH settings affect the infill density and pattern on the inside of the printed part.

General: Strength

The Strength slider affects the infill density of the part. The infill pattern can be configured between honeycomb, rectilinear, line, and concentric. By default, these options are set to ‘AUTO’, but you may want to reconfigure these settings to increase the strength of your final part.

High density (55-75%) = slower printing + increased expense + increased strength.

Medium density (35-54%) = average printing + average expense + average strength.

Low density (5-34%) = faster printing + low cost + low strength.

HONEYCOMB infill pattern. Offers average wall strength with increased compression strength. Infill density from left-to-right: 18%, 37%, 55%, 75%
RECTILINEAR infill pattern. Each infill layer will print in an alternating direction. Offers increased wall strength with average compression strength. Infill density from left-to-right: 18%, 37%, 55%, 75%
LINE infill pattern. Each infill layer will print in an alternating direction. Offers average wall strength with limited compression strength. Infill density from left-to-right: 18%, 37%, 55%, 75%
CONCENTRIC infill pattern. Offers limited wall strength with limited-to-average compression strength. Infill density from left-to-right: 18%, 37%, 55%, 75%

Support

This option is available from the GENERAL print settings menu. SUPPORT MATERIAL settings affect support generation methods and patterns.

General: Support Material

Support structures are necessary in supporting 3D printed parts with overhangs, bridges, or undercuts. If your geometry includes any of these features, the SUPPORT MATERIAL button should be switched ‘ON’.

Select the EDIT button to adjust the support angle and pattern.

The ANGLE value defines the angle at which support structures are generated for over-hanging or undercut geometry. It is recommended this setting be left as default: AUTO.

AUTO Angle Value = average print success + average print cost + efficient print time. This option is recommended. The printer will determine when it requires more or less support.

Higher Angle Values (75-90 Degrees) = increased print success + extreme increase in print cost + extreme increase in print time. The removal of support material from your final part will also prove quite difficult.

Average Angle Values (45-74 Degrees) = increased print success + increased print cost + increased print time. These values are safe.

Lower Angle Values (0-44 Degrees) = lower print success + lower print cost + lower print time.
 For instance, a support setting of 50 Degrees would print support structures for overhanging geometry that is less-than or equal-to 50 Degrees. An example is provided in the image above.
 As a second example, a support setting of 10 Degrees would print support structures for overhanging geometry that is less-than or equal-to 10 Degrees.

Units

This option is available from the TRANSFORMS print settings menu. UNITS option allows you to switch between (mm) or (in).

Transforms: Units
Stereolithography [.stl] files do not preserve units of measurement (e.g. inches, millimeters, miles, light years etc.). However, they can preserve unit values (i.e. 10 x 10 x 10). If you find your geometry appears too small or large, begin by adjusting the UNITS value.

Scale

This option is available from the TRANSFORMS print settings menu. SCALE option affects the scale of the part.

Transforms: Scale
The Scale slider affects the scale of the part. The Lock Scaling Ratio button can be turned off to allow for independent scaling in the X, Y, and Z axes.

Rotate

This option is available from the TRANSFORMS print settings menu. ROTATE option affects the orientation of the part.

Transforms: Rotate
The Rotate slider affects the orientation of the part. Note: Holding the SHIFT key will snap the rotation angle to the nearest 45 degree increment

Misc

Bottom Bar Options

At the bottom of the NVCloud Print Settings window, various universal options are provided (from left-to-right):

GROUP BAR: This expanding menu allows you to select which print group (and printer) the print should be sent to. This is covered in NVCloud: Submission & Review.

SUBMIT: Selecting this button sends your file to the selected printing group for approval. This is covered in NVCloud: Submission & Review.

SAVE: Select this button to save your print file and settings. Your file can be retrieved at any time, by browsing to the LIBRARY tab and selecting SAVED PARTS* in the left menu. (*Link opens in new tab, login required)

RESET: Select this option to reset the print settings and any transformations you’ve applied.

CANCEL: Select this option to exit the print settings menu. Your uploaded file and any adjustments will be discarded.
Posted on

NVBot: NVCloud Interface

Dashboard

Dashboard

The DASHBOARD provides quick details on your current 3D Printer & Group. From this tab, you can view:

– Printer Name & Status header: IDeATe has (2) NVPro Printers, named ‘NVBOTS 01 – CMU‘ & ‘NVBOTS 02 – CMU‘. This is relevant when retrieving your print from the printer. Print status’ can range from Error, Maintenance, or Printing.

– Current Print Job is the file that is currently printing.

– Queue Preview lists the next file in-line for printing.

– Live Feed provides a camera feed for the current print job.

– Filament details include the color & type of material being printed.

– Printer Temperature & Ambient Conditions indicate temperature and humidity values, local to the equipment.

Profile

Profile
When hovering over the PROFILE tab, located in the top-right corner of the browser window, a drop-down menu will appear with additional options. Each option is described below, with the exception of LOGOUT.
Change Group

Selecting the CHANGE GROUP option, allows you to switch between any groups you’ve been invited to. Selecting and printing to the right group, may determine whether the print is billed to the course, or the student. There are (2) types of groups:

a) Course groups are created for each IDeATe Course that uses the NVPro Printer. Any course related printing should be submitted from the affiliated course group. Initially, you will receive an invite to join at least (2) course groups. The group title will reflect your course name, followed by a numeric label ’01’  or ’02’. Group titles ending in ’01’ provide access to NVBOTS – 01. Group titles ending in ’02’ provide access to NVBOTS – 02.

b) Two universal groups, QUEUE 01 & QUEUE 02, provide continued access to the NVPro printing equipment after your IDeATe course ends. These groups can also be used for personal or other non-IDeATe course related projects.
Profile
Selecting the PROFILE option, allows you to modify personal profile settings such as password, first & last name. Within this area, you can also view/access your printing history. This will be helpful in retrieving/viewing time-lapse videos of your print jobs.
Notifications
Within the NOTIFICATIONS option, you can adjust your personal notification settings. All of which are self explanatory, but helpful nonetheless.
User Management
The USER MANAGEMENT option, will provide you with a listing of all the existing groups & users for the NVPro printers. This area is primarily for Administrative purposes.

Upload/Approve/Queue

Upload
Selecting the UPLOAD tab, will allow you to upload a Stereo-Lithography [.stl] file into the NVCloud interface. After upload, you can begin preparing the print settings.

 

Approve

After you’ve uploaded a file, modified the print settings, and submitted the file for printing- the file is placed in the approval queue. When selecting the APPROVE tab, you can browse/view a list of 3D Print submissions that are awaiting approval. From this area, you can also select your print file, and review relevant information pertaining to the print job. (e.g. Estimated Filament usage for calculating price) If you find an error or mistake in the print job info, you can also cancel your print job from the APPROVE tab.

Approving print jobs is coordinated by IDeATe Technical Staff. You will receive an email notification when your print job is approved; unless this notification option is disabled from your personal notification options. *Find NOTIFICATION information under the PROFILE tab.

 

Queue
Once your print job is approved, you can view its order in the print queue from the QUEUE tab. *Unless notification options are disabled, email notifications are sent when your file begins and completes. Other automated notifications are sent if there are printing errors or if the print job is cancelled. *Find NOTIFICATION information under the PROFILE tab.

Library

Library
Within the LIBRARY, you’ll find several prepared files that are open source and ready to print. The print jobs are ready for printing, but they are charged to your student account.

History

History
Selecting the HISTORY tab will provide your printing history. This is helpful when retrieving/accessing timelapse videos of your print jobs. This is also helpful in retrieving information on print job status’. (e.g. Not Approved, Skipped, Success, Failure etc.)