Standard ComponentsΒΆ
(need renderings or images for shoulder screws, servos, bearings, etc.)
The laser-cuttable parts of the flat-pack kit are designed to be used with particular standard fasteners and components. The kit itself is designed on a metric grid. But this being the USA, both metric and inch-sized component systems are supported to varying degrees, simply because inch-sized 1/4-20 fasteners are often more readily available than metric M6 fasteners.
Description | Part/Size | Notes |
---|---|---|
inch button head cap screw | 1/4-20 x 3/4 | captive-screw connections in 6 mm stock |
inch hex nut | 1/4-20 x 7/32 | captive-screw connections in 6 mm stock |
metric socket head cap screw | M3 x 10 | anchoring NEMA17 stepper motors |
metric socket head cap screw | M6 x 20 | |
metric socket head cap screw | M6 x 25 | |
metric socket head cap screw | M6 x 30 | |
metric socket head cap screw | M6 x 40 | |
plain washer | M5 x 10 | for 6 mm shoulder screw thread |
plain washer | M6 x 12 | for M6 screws |
oversized plain washer | M6 x 18 | for M6 screws |
metric thin nut | M5 x 2.7 | for 6 mm shoulder screws |
metric hex nut | M6 x 5 | for M6 screw |
metric wing nut | M6 | for M6 screws |
6 mm shoulder screw | 6 x 14 | has M5 thread; sized for pivoting two 6mm thicknesses |
ball-end hex key | 3 mm | for 6 mm shoulder screw |
ball-end hex key | 5 mm | for M6 socket head cap screw |
combination wrench | 10 mm | for M6 nuts |
short wood screw | #3 x 0.5” | for laminating 6 mm plywood |
wood screw | #4 x 1.0” | |
NEMA17 Stepper Motor | KL17H248-15-4A | |
NEMA23 Stepper Motor | KL23H256-20-6A | |
Hextronik Analog Micro Hobby Servo | HXT900 | |
Turnigy Digital Hobby Servo | TGY-5513MD | |
Turntable, 3” Square | McMaster-Carr 6031K16 | for rotating platforms, 200 lb load capacity |
15 mm aluminum extrusion | MiSUMi KHFS3-1515-2000 | |
music wire (hard wire) | 0.055 inch | for tendons and pushrods |
rubber suction cup foot, 3-1/8” Diameter | McMaster-Carr 53535A45 | for optical tables, has 1/4-20 stud |