CKS-1 Arduino Uno Shield Gallery¶
![../_images/P1050026.jpg](../_images/P1050026.jpg)
CKS-1 Arduino Uno Shield prior to installation on Arduino. Note that the edge pins point down to fit into the Arduino headers, but everything else is on the top side of the board.¶
![../_images/P1050027.jpg](../_images/P1050027.jpg)
Top view. Included in this assembly: core parts (Arduino headers, capacitors, barrel plug, servo headers), as well as all the inputs (headers and resistors), the DC motor section (driver headers, motor headers), and the solenoid section.¶
![../_images/P1050028.jpg](../_images/P1050028.jpg)
Bottom view to show bottom-side headers for the Arduino.¶
![../_images/P1050032.jpg](../_images/P1050032.jpg)
Oblique top view.¶
![../_images/P1050034.jpg](../_images/P1050034.jpg)
Opposite oblique top view.¶
![../_images/P1050041.jpg](../_images/P1050041.jpg)
Arduino Uno and CKS-1 Shield prior to assembly.¶
![../_images/P1050042.jpg](../_images/P1050042.jpg)
CKS-1 Shield installed on Arduino Uno.¶
![../_images/P1050045.jpg](../_images/P1050045.jpg)
Top view of assembled shield with the DRV8833 DC motor driver installed in its header rows.¶
![../_images/P1050046.jpg](../_images/P1050046.jpg)
Oblique view of assembled shield.¶
![../_images/P1050050.jpg](../_images/P1050050.jpg)
Oblique view of assembled shield, rotated 90 degrees CW.¶
![../_images/P1050048.jpg](../_images/P1050048.jpg)
Oblique view of assembled shield, rotated another 90 degrees CW.¶