Object 01.

My first object started with two pieces of fabric, one white and one black. I had wanted to initially experiment with darting, but this ended up becoming more of an exploration on tunnels. I chose red as my third color to highlight the special moments and interactions happening within and without.

object 1

This object turned out much larger than I anticipated. I was left with a rather curved form, which was a happy accident. In this, I also learned a bit about binding and restriction. I did not approach this object which much of a vision in mind, at some point I just went with what fabric was hanging on the ends to close it off.

Object 02.

For my second object, I wanted to better refine my tunnels, as in the previous object, I had accidentally left an opening. This object was challenging to figure out in terms of connection and functionality. This resulted in a slightly less systematic process of creation. However, it actually added to the character of the object in that pulling each ball resulted in a different reaction.

object 2

Object 03.

My last object was surprisingly the most difficult to make. Despite it being its original form of a cone, the detailing of the exterior, zipper, and interior posed a big challenge for me. I had a lot of trouble figuring out the logic behind how the red interior would be attached to the rest of the cone, while being able to open and not be exposed when it was unzipped. I think that in the future I would definitely be more cautious about my seam allowances.

image-18

image-19

image-20

image-21

image-22

image-23

perspective

unrolled

rhino: https://drive.google.com/file/d/1_4jynnZslGzpcc6sScr4oJg9Xbo1AnNv/view?usp=sharing

music: https://www.youtube.com/watch?v=-0uMeJGva7o

The piece of music I chose makes me nostalgic and also happy and positive, so I wanted to convey the conflicting emotions in my tower with the geometries I utilized. The tower is solely orthogonal geometries and transitions to more curved forms to express the dynamisms of the song as you travel through the space. The deconstructed nature of the forms reflect a similar effect that the song conveys.

Inflatable 01.

For the first inflatable, I had a clear vision for what I wanted to create. My idea was to have clear spherical forms bulging out of one larger main body. I decided to execute this utilizing a royal blue plastic and a clear plastic to emphasize the form’s dome protrusions.

deflated

inflated

Making this inflatable turned out to be a bigger challenge than I anticipated. The first and biggest challenge I faced were creating the protrusions. I had imagined them to be domes and assumed that cutting circles would lead to the desired form. I quickly learned that to not be the case and instead requires way more material than I had assumed. Although I was not able to figure out how to create the perfect dome, I experimented with the sizes of the protrusions by increasing/decreasing the amount of plastic I left as excess when taping it onto the blue body. Another challenge was making sure that the pieces were all attached securely to each other. I had a lot of trouble inflating my piece since there were many holes which I could not locate upon inspection. I had to reseal each addition to resolve this issue.

Inflatable 02.

For my second inflatable, I chose to experiment with using only triangular and quadrilateral geometries. I layered a few plastic bags on top of each other and cut them all diagonally which gave me a set of shapes. I decided to try sealing this one with the heat seal since my first inflatable was sealed only with tape and caused a lot of trouble. I enjoyed how this piece takes on round forms despite its sharp edges. I also found the variation of visible seams interesting and unique. I tried to have a good balance of clear and solid plastic to allow for a more dynamic visual.

inflatable 2 geometries

inflatable iteration 2

Inflatable 03.

My third inflatable was an exploration of connection and restriction. Initially, I had cut strips from green and white plastics and attempted to create a singular object with sections. However, it was difficult to connect each strip with the overlaps and I had trouble using the heat seal. The air was also not travelling or filling the spaces properly. I then took individual strips again and sealed them individually into tubular forms. I left a section open at the top to connect all of them together which create a curved spine. I secured this area by taping over it. This inflatable was fun because it was interesting to understand how air travels and the potential that has for other explorations. The way in which it inflated also allowed for it to take on a performative experience.

deflated

inflated

Sewing Practice / sphere + patches

Screenshot 2023-01-31 213417

Screenshot 2023-01-31 213438