Page 2 of 18

Assignment 23: Rebecca and Celia

Update We decided to use two soft sensor pads for each puppet, a green one to control the left and right motion of the puppet and a yellow…

Class 25: Project 2 – Final Revisions

Tue. May 4, 2021, 10:30AM to 12:20PM (Zoom) Today’s class is primarily devoted to final interventions. Warm-up Brief check-in. Any questions? Announcements We will keep our Monday, May…

Assignment 23: Kanvi and Yael

The two of us continued to develop our ideas into something that could physically work. Yael I created the hats(!!!) for the little desk friends. These hats have…

Assignment 23: Rebecca K and Helen

Inflated Pieces lace confetti adds nice color, texture, and movement in the pieces. Inflated Release Progress shoulder pads reveal with rotational pouch motor “curtains up” reveal with linear…

Assignment 22: Masks Off

Anishwar ~ I began working on the code programming the Bluefruit to play sounds. Using the built in light sensor on the Bluefruit, I programmed it to produce…

Assignment 22: Kanvi and Yael

We both continued working on our parts of the project. Yael I was focused on developing a more interesting form with defined spots for the servo. My favorite…

Class 24: Project 2 – Electronic Air Pumps

Thu. Apr. 29, 2021, 10:30AM to 12:20PM (Zoom) Today’s class is primarily devoted to check-ins and hooking up air motors. Warm-up Brief check-in. Any questions? Announcements We will…

Assignment 22: Rebecca K and Helen

Idea 1: Rigid Body on hobby servo to facilitate release pros: safety pins that are fastened to fabric or string can create an unfolding/unfurling effect (especially if fabric…

Assignment 22: Rebecca JL and Celia 🥰

Update For this assignment Rebecca continued working on updating the code while I kept experimenting with the Garth puppet to see what range of movements I could achieve…

Bite Size Assignment – Celia 👼

I connected the Garth and Olivia puppets to the servo motors and used the “servo sweep” code to animate them. I decided to use dowels so I could…