Month: September 2019Page 3 of 6
Ideation After discussing for some time, we decided to make two machines that ‘picked on’ one another. Similar to friends joking around, one machine would move and trigger…
Video Description Our goal was to create two robots that would “talk” to each other by passing a ball bearing back and forth between them. The initial idea…
Our Catch Machine! We decided to make a catch machine from our knowledge of the Demo 2 project. We started by using the Servos and a Ball and…
The switch in this mechanism is triggered on and off by the notches on the half gear and this interaction allows the gear or servo to rotate. It…
Project Objectives The objective was to build a mechanism that takes inputs from a photoresistor and outputs accordingly. The idea was to have my mechanism move forward and…
My Project is a ramp where the ball passes over the phototransistor and is then pushed back up the ramp by the servo. It’s a very simple mechanism…
Brainstorming and Initial Ideas I wanted to use the idea behind my “Rocking and Rolling” demo to create a system that uses two lever switches to tilt a…
For our second deliverable, I decided to try a new design from my first demo. My main goal in mind was having the product sense its surroundings and…
Controllable Swinger The purpose of my project is too add intractability to my Demo 1. There are five LTH-1550 photoreflective sensors glued unto a board and the user…
This small bug robot freezes in its tracks when it’s about to be “squashed”! This buggo is trying to escape! Sadly, it can’t go anywhere though coz it’s…