due at the beginning of Class 8: Monday, Feb. 11th

Some definitions

The good people at the Oxford English Dictionary tell us that a transducer is “any device by which variations in one physical quantity (e.g. pressure, brightness) are quantitatively converted into variations in another (e.g. voltage, position).”

For this assignment, we’ll refer to a realm of related “physical quantities” as a domain. For instance, “sound” is the domain that encompasses things that either produce or sense vibrations traveling through a medium, and the domain “light” includes things that produce light (like LEDs) as well as light sensors.

A transducer is for us simply some device which changes an input signal in one domain (such as light, sound, vibration, magnetic field, etc.) into a related output signal in another domain.

The Double Transducer

The goal of this project is for each team to build a device which reads some input signal in a domain, then converts it into a signal in another domain, reads that second signal, and finally outputs a third signal, which is in a third different domain. Whereas a single transducer would change a signal from one domain to another, a “double transducer” will do that process twice in a row.

Examples

A light-to-movement-to-sound machine

The user’s description of this double transducer might be: “When the light in the room gets brighter, a little motor moves and turns a little knob, and then the sound coming out of a speaker gets louder. When the light in the room gets dimmer, the opposite happens, and the sound gets quieter.”

To explain this device from its creator’s perspective:

• The first transducer takes as an input the light level in the room. It drives the position of a servomotor as its output—this transducer changes an input signal in the “light” domain to an output in the “mechanical/position” domain.
• The second transducer then reads the “mechanical/position” state of the hobby servo output using a potentiometer. It then uses the potentiometer’s value to adjust the volume level of a speaker, which is a “sound” output.

The chain of information through this double transducer could be shown like this:

light (sensed by a photocell) ⇒ mechanical position (driven by a motor)
→ mechanical position (sensed by a potentiometer) ⇒ sound (produced by a speaker)

Note that the ⇒ double arrows above show steps where the signal has been transduced across domains, and the → single arrow shows a step where an output in one domain is being read as an input in that same domain.

A position-to-light-to-vibration machine

A user’s description: “When the machine gets closer to an object, it shines less light on a sensor, and then a small motor vibrates more. When the machine gets farther from an object, it shines more light on a sensor, and the motor vibrates less.”

The two transducers:

• The first transducer uses an ultrasonic ranger to detect the proximity of an object to the machine. When it detects a closer object, it makes an LED get dimmer; when it detects something farther away, it gets brighter.
• The second transducer measures the light coming off of that LED. When it sees a brighter light, it makes a small vibration motor move less, and when it sees a dimmer light, it makes the motor vibrate more.

The information chain of this double transducer could be shown like this:

position (detected by an ultrasonic ranger) ⇒ light (produced by an LED)
→ light (measured by a photocell) ⇒ mechanical vibration (produced by a vibratory motor)

Anti-example: a temperature-to-sound-to-temperature machine

This is an example of a transducer that does not satisfy this assignment’s prompt.

A user’s description: “When the thermometer detects a higher temperature, it makes a speaker get louder. When the microphone hears that louder sound, it turns on a heater. On the other hand, when the thermometer detects a lower temperature, the speaker gets quieter, and the heater turns down too.”

The problem here is that the input domain of the first transducer (which is temperature⇒sound) is the same as the output domain of the second one (which is sound⇒temperature). All three domains in the machine must be different. If the output of the second transducer were instead something like a laser changing brightness, then this would satisfy the assignment.

Points of entry

Where to start a project such as this one? Perhaps the best way would be to take a careful, slow tour of the electronics parts shelves in the Phyical Computing Lab. Just as a chef searching for inspiration may browse ingredients and consider emergent novel combinations, by browsing the wide variety of sensors and actuators you may well stumble across some interesting or intriguing parts.

Discussion and ideas

Usually when we instruct the Arduino to transduce one signal to another, its inner workings all happen electronically and invisibly. But by building the double transducer we add some interesting qualities: for one, some inner “state” of the machine is directly observable. That state may also quite possibly be fragile; the outside world, or the user herself, might reach in and directly affect the inner state. (For instance, if the inner state of the machine uses an LED paired with a light gauge, the user could shine extra light onto the machine.)

Another consequence of building an exposed link in the signal chain is that there is the possibilty that there will be some effect of the data that flows through the system. This effect might be filtering, noise, or both. In the light-to-movement-to-sound example above, the motor can’t move very quickly: so that will cause an unavoidable mechanical delay in the output of the system. (It might also eliminate very small changes, since it probably won’t move in very small increments.)

Groups

You’ll be assigned a partner for this project; pairings are visible to logged-in users here. Partners work together and share the same credit for the assignment. You can divvy up tasks how you’d like, but it should be something that both partners are comfortable with. If you are becoming frustrated or feel like you’re not going to be succeed in getting a project together with your assigned partner, speak with Zach as soon as possible so we can sort things out.

Scope

Scoping projects can be very difficult sometimes. This assignment is given early in the semester, when there hasn’t been much time for technical learning. You’ll just be getting comfortable with simple circuits by the time the project comes due, and you’re not expected to build something very complex electronically or mechanically. Instead, you’re expected to think creatively and build something interesting that actually functions.

For this project it is preferable to scope your work pragmatically and finish with a functioning machine rather than aiming for a very sophisticated outcome and falling short. Give yourself plenty of time to fail and iterate before the final crit!

That said: you are welcome to aim for a more-than-double transducer, such as a triple, quadruple, etc., with the caveat that the final project is expected to actually work at the time of the critique.

A final note on scope as it relates to presentation: for this first assignment, do not worry about hiding your wires, etc. It’s ok for your machine to look aesthetically sloppy, so long as it works. Build it out of cardboard, tape, straws, and hot glue if you want! Low-cost and easy-to-use materials are great and expected.

Documentation

Take pictures as you’re going along!

Your completed documentation is due at the beginning of Class 10: Monday, Feb. 18.

Why do you submit documentation?

The Arduino project was born, after some twists and turns, out of an Italian masters student’s thesis.¹ He could have, one imagines, kept all those ideas to himself, started up a little factory, and sold them for €50 and called it a day. But the project has grown into a worldwide thing of beauty because the hardware designs (how to build an Arduino) and all of the underlying software (how to program one) are “open-sourced.” This means that anybody who wants to can see the community’s work and make their own version. Maybe even improve it themselves, and then suggest that their improvement might be something the community as a whole wants to adopt. Don’t believe me? Look at all these people contributing to the project’s Github page.

Think of how great it is for someone to see your cool project, get inspired, and build on it to make their own customized version. The answer is: very great! Having stood on the shoulders of others in the world of people making things, you can begin to return the favor by sharing the interesting ideas and technical insights you had.

Finally, we in IDeATe are interested in encouraging an introspective inquiry into your own process of ideation, creation, and revision. Just as writing an essay helps you understand your own argument on a topic better, documenting your own creative process will help you understand your creativity better. Documentation gives you insight to see what you got hung up on and what steps you wish you’d lingered on more. It opens a window onto your own process.

What to submit (documentation content requirements)

If you have any questions about the submissions requirements, or run into technical problems, be sure to contact the instructor or TA before the due date.

Each documentation submission must consist of at least:

• A “featured image” that is a good overall view of the project. This image will show up above the title of your project in the overview page. This image should be one of the “well-shot” images described below, or a cropped subset of one of them. Select the featured image by clicking on “set featured image” in the right column of the post editing page.

• The project title.

• Carefully- and well-shot images of the final project. Take these using IDeATe’s PhotoZone backdrop and lighting for an especially easy professional look, or shoot out in the field if you prefer. The DSLR photography guide provides a lot of pointers.
  At least three shots:

  1. Overall photo for proportion and scale
  2. Detail photo of any part that you’d like to highlight (up to 3)
  3. Gif or gifv or little .mov to embed in the documentation page which shows the machine working (i.e. reading an input, passing the data internally, and then driving an output)

Each image should be captioned. (To add captions in WordPress: click on an image, click on the pencil icon to edit it, write a caption, and click “update.”) The captions serve to explain both what the viewer is looking at, as well as elucidating some of the operating details of the object. Two captioned images plus one short animated clip is the minimum; use more of them if you want to tell a deeper story about the project.

• Simple narrative description of the thing and usual operation of the thing—the type of plain and straightforward description that you might write in a letter to a child to explain what you had made. Free of judgment and totally literal and straightforward. Try to use as little technical language as possible. (E.g. “A white plastic box has a switch on the top side. When the user turns it on, a green LED flashes five times showing that the system is ready. A small white flag waves back and forth.”) For a study in the art of using simple language, see Randall Munroe’s wonderful Up Goer Five. To use a simple-language filter yourself, try the Up-Goer Five text editor.

• Three progress images, each of which could be a step or misstep that happened along the developent process, and each with at least a sentence or two caption. These images may capture decision points, especially interesting or illustrative mistakes, or other mileposts along the way. The idea is that these medium-quality images (though good pictures work too) are taken along the way to document progress. Sometimes you might understand these as being moments-that-matter only in retrospect! The safe route, therefore, is to snap lots of photos as you go along for later review.

• Discussion pertaining to process and outcome. For instance, what was easy, what was hard, what did you learn? What little tweak, in retrospect, would’ve changed the direction entirely? This is an opportunity for you to reflect on your creative and technical growth through the project, and think about what growth you want to aim for next. This shouldn’t be a recital of your process, but rather a meaningful reflection, 2–4 paragraphs in length.

• Schematic, hand-drawn and scanned, or executed in software like Fritzing, EAGLE, in some flowchart application like draw.io, or any other way that produces a reasonably legible output. This should be done well enough that a competent person, reading the drawing and with the appropriate parts, could recreate the electrical system of the project. Note: Do not just draw the letter A with a rectangle around it to represent the Arduino. Write a more complete label for it, such as “Arduino Uno R3.”

• Code submission, embedded into the project page, and optionally also with a Github or other version control service public-facing link. Your code should be reasonably commented throughout so that people other than you (the author) can better understand it. You don’t need to explain every single line—that would be overkill—but leave useful notes in a reasonable measure. Write a comment block at the top of the code including:

  • the project title,
  • (optionally) your name,
  • a description (short or long) of what the code does,
  • any description of pin mapping that would be useful to somebody else trying to recreate your work,
  • appropriate credit to any other person’s/project’s code that you incorporated into your project, and
  • (optionally) a license notice (i.e. copyright, CC BY-SA 4.0, the MIT License, release it to the public domain, or just follow your heart). If you have written code that you wish to keep strictly proprietary for any reason, please speak with the instructor about an exception to this documentation requirement.

Make sure that your final code as it appears on the public-facing post is correct and will compile!

To embed the code properly: on the WordPress “Edit Post” page, move your cursor to where the code should be inserted in your post. Click the “Code Insert” button in the toolbar above the post (it is marked {…}). For Language, select C. Paste the code—properly indented!!—into the window, and click OK.

How to submit (WordPress instructions)

All documentation is submitted by making a post on the course WordPress site.

• For Project 1: A Double Transducer, make a post with the title in the format “Double Transducer: Your Project’s Name Here.” The post should have both group members added as authors. On the right side of the page where you compose your post, under “Categories” select “Project 1.”

• Upload your images at a reasonably high resolution; 1000 pixels of width is the lower boundary of what you should aim for. After adding an image to the post, click on it in the editor, click on the pencil icon to get to its Image Details popup, and select Size: large.

• You can also use the Image Details menu to add a caption to an image.

Ordering parts

If you need parts that aren’t available in IDeATe Lending or in Phys Comp stock, the class budget may be able to make the purchase for you. As soon as you decide you’ll need a part, fill out this order form and, so nothing falls through the cracks, also write an email to Zach advising you just filled the form out so it can be processed as quickly as possible.

Feedback rubric

Credit is allocated as follows:

• 10% progress check-in meeting
• 40% crit
  • 35% technical proficiency (complete functioning demonstrated)
  • 5% creativity, novelty, and demonstration of original thinking
• 50% documentation
  • 20% images
  • 15% writing (narrative and discussion sections)
  • 10% schematic
  • 5% code

---

Footnotes: