Assignment Seven

/***************************************************
This is a library for the CAP1188 I2C/SPI 8-chan Capacitive Sensor

Designed specifically to work with the CAP1188 sensor from Adafruit
----> https://www.adafruit.com/products/1602

These sensors use I2C/SPI to communicate, 2+ pins are required to
interface
Adafruit invests time and resources providing this open source code,
please support Adafruit and open-source hardware by purchasing
products from Adafruit!

Written by Limor Fried/Ladyada for Adafruit Industries.
BSD license, all text above must be included in any redistribution
****************************************************/
//--------CAP1188 SETUP --------
#include <Wire.h>
#include <SPI.h>
#include <Adafruit_CAP1188.h>
#define CAP1188_SENSITIVITY 0x1F // Setting the sensitivity....lower the number the more sensitive!!
static const int CAP1188_RESET = 12; // Reset Pin is used for I2C or SPI
Adafruit_CAP1188 cap = Adafruit_CAP1188();
//------------------------------

//--------NEOPIXEL SETUP --------
#include <Adafruit_NeoPixel.h>
#ifdef __AVR__
#include <avr/power.h>
#endif
static const int PIN = 4;
static const int NUMPIXELS = 2;
Adafruit_NeoPixel pixels = Adafruit_NeoPixel(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800);
//------------------------------

//------- TIMING --------
unsigned long lastSampleTime = 0;
unsigned long sampleInterval = 500; // in ms

//------------------------------

//-----INCOMING VALUES-----
String incomingString; // setting string from p5.js

//-----VIBE PINS-----
static const int vibePinOne = 6;
static const int vibePinTwo = 9;

int vibeOne;
int vibeTwo;

int wait = 10;
int touchedNUM;

int lightCount = 0;
int personOneCount = 0;
int personTwoCount = 0;
int vibeCount = 0;

bool personOne = false;
bool personTwo = false;
bool light = false;
bool vibe = false;

void setup() {
Serial.begin(9600);
Serial.println("CAP1188 test!");
if (!cap.begin()) { // Initialize the sensor, if using i2c you can pass in the i2c address // if (!cap.begin(0x28)) {
Serial.println("CAP1188 not found");
while (1);
}
Serial.println("CAP1188 found!");
cap.writeRegister(CAP1188_SENSITIVITY, 0x6F); // 2x sensitivity THIS SEEMS TO WORK THE BEST FOR 3.5" plate sensors

pinMode(vibePinOne, OUTPUT);
pinMode(vibePinTwo, OUTPUT);
pixels.begin();
pixels.show();
}

void loop() {
unsigned long now = millis();
uint8_t touched = cap.touched();

if (touched == 0) {
// No touch detected
return;
}

if (lastSampleTime + sampleInterval < now) {

lastSampleTime = now;

for (uint8_t i = 0; i < 8; i++) {
if (touched & (1 << i)) {
int currentTouch = i + 1;

if (currentTouch == 1) { // RIGHT Light
touchedNUM = 1;
lightCount++;
light = true;
vibe = false;
} else if (currentTouch == 2) { // TOP Person One
touchedNUM = 2;
personOneCount++;
personOne = true;
personTwo = false;
light = false;
vibe = false;
// Serial.print("PersonOne: "); Serial.println(personOne);
// Serial.print("PersonTwo: "); Serial.println(personTwo);
} else if (currentTouch == 3) { // BOTTOM Person Two
touchedNUM = 3;
personTwoCount++;
personOne = false;
personTwo = true;
light = false;
vibe = false;
// Serial.print("PersonOne: "); Serial.println(personOne);
// Serial.print("PersonTwo: "); Serial.println(personTwo);
} else if (currentTouch == 4) { // LEFT Vibe
touchedNUM = 4;
vibeCount++;
light = false;
vibe = true;
}

if (personOne == true){
Serial.println("Active: PERSON ONE");
} else if (personTwo == true) {
Serial.println("Active: PERSON TWO");
}

}
}
}
personOneFun();
personTwoFun();
}

void personOneFun() {
if (personOne == true && personTwo == false && light == true) {
lightBLINK(0);
//lightON(0); // person ONE light on
lightOFF(1); // person two light off
vibeOFF(0); // vibes off
vibeOFF(1);
} else if (personOne == true && personTwo == false && vibe == true) {
lightOFF(0); // lights off
lightOFF(1);
vibeON(0); // person ONE vibe on
vibeOFF(1); // person two vibe off
} else {
lightOFF(0); // lights off
lightOFF(1);
vibeOFF(0); // vibes off
vibeOFF(1);
}
// Serial.print("Light Count: "); Serial.println(lightCount);
// Serial.print("Vibe Count: "); Serial.println(vibeCount);
}

void personTwoFun() {
if (personOne == false && personTwo == true && light == true) {
lightBLINK(1);
// lightON(1); // person TWO light on
lightOFF(0); // person one light off
vibeOFF(0); // vibes off
vibeOFF(1);
} else if (personOne == false && personTwo == true && vibe == true) {
lightOFF(0); // lights off
lightOFF(1);
vibeON(1); // person TWO vibe on
vibeOFF(0); // person one vibe off
} else {
lightOFF(0); // lights off
lightOFF(1);
vibeOFF(0); // vibes off
vibeOFF(1);
}
// Serial.print("Light Count: "); Serial.println(lightCount);
// Serial.print("Vibe Count: "); Serial.println(vibeCount);
}

void vibeON(int m) {
if (m == 0) {
digitalWrite(vibePinOne, HIGH);
delay(500);
digitalWrite(vibePinOne, LOW);
delay(250);
} else if (m == 1) {
digitalWrite(vibePinTwo, HIGH);
delay(500);
digitalWrite(vibePinTwo, LOW);
delay(250);
}

}

void vibeOFF(int m) {
if (m == 0) {
digitalWrite(vibePinOne, LOW);
} else if (m == 1) {
digitalWrite(vibePinTwo, LOW);
}
}

void lightON (int m) {
pixels.setPixelColor(m, pixels.Color(255, 255, 255));
pixels.show();
}

void lightOFF (int m) {
pixels.setPixelColor(m, pixels.Color(0, 0, 0));
pixels.show();
}

void lightBLINK (int m) {
pixels.setPixelColor(m, pixels.Color(255, 255, 255));
pixels.show();
delay(750);
pixels.setPixelColor(m, pixels.Color(0, 0, 0));
pixels.show();
delay(500);
pixels.setPixelColor(m, pixels.Color(255, 255, 255));
pixels.show();
delay(750);
pixels.setPixelColor(m, pixels.Color(0, 0, 0));
pixels.show();
delay(500);
}

//-----SERIAL VARIABLES-----
var serial;
var portName = '/dev/cu.usbmodem1411';

//-----WINDOW DIMENSIONS-----
var windW = 900;
var windH = 600;

//-----Color Values-----
var colorLeft = 255;
var colorTop = 255;
var colorRight = 255;
var colorBottom = 255;

var personOneColor = 255;
var personTwoColor = 255;
var lightColor = 255;
var vibeColor = 255;

//-----button counts-----
var countLeft = 0;
var countTop = 0;
var countRight = 0;
var countBottom = 0;

var personOneClick = 0;
var personTwoClick = 0;
var lightClick = 0;
var vibeClick = 0;

//-----button selected-----
var buttonLeft = false;
var buttonTop = false;
var buttonRight = false;
var buttonBottom = false;

var personOne = false;
var personTwo = false;
var light = false;
var vibe = false;

//-----Icons & Images -----
var personOneImg , personTwoImg, lightImg, vibeImg;
var personOneImgW , personTwoImgW, lightImgW, vibeImgW;

var squares = [];
//------------------------

var latestData

var serialPortThree;

function preload() {
// preload() runs once
personOneImg = loadImage('assets/person.png');
personTwoImg = loadImage('assets/person.png');
lightImg = loadImage('assets/light.png');
vibeImg = loadImage('assets/vibe.png');
personOneImgW = loadImage('assets/person-w.png');
personTwoImgW = loadImage('assets/person-w.png');
lightImgW = loadImage('assets/light-w.png');
vibeImgW = loadImage('assets/vibe-w.png');
}

function setup() {
//-----Serial Setup-----
serial = new p5.SerialPort();
serial.on('list', printList);
serial.on('connected', serverConnected);
serial.on('open', portOpen);
serial.on('data', gotData);
serial.on('error', serialError);
serial.on('close', portClose);

serial.list();
serial.open(portName);

console.log("Port Name: " + portName);
//----------------------

createCanvas(windW, windH);
smooth();
background(240);

// initial text at the top (where your color's RGB will be)
push();
textSize(25);
textAlign(CENTER);
noStroke();
text("PATCH UI", windW / 2, 50);
pop();

// for (var i = 0; i 220 && mouseX 195 && mouseY 330 && mouseX 151 && mouseY 544 && mouseX 195 && mouseY 330 && mouseX 239 && mouseY 140 && mouseX 400 && mouseY 315 && mouseX 400 && mouseY 480 && mouseX 400 && mouseY 645 && mouseX 400 && mouseY < 500) {
vibeClick++;
if (vibeClick % 2 == 1 ){ //&& personTwo == false && personOne == false && light == false
vibeColor = 100;
vibe = true;
} else if (vibeClick % 2 == 0){
vibeColor = 255;
vibe = false;
personOneClick = 0;
personTwoClick = 0;
lightClick = 0;
}
console.log("Vibe clicked: " + vibeClick);
}
}

//-----SERIAL FUNCTIONS-----

function printList(portList) {
for (var i = 0; i 5)
// {
// aNum = aString[1];
// aOff = aString[3];
// aSize = aString[5];
// }
// console.log("aNum: " + aNum + "aOff: " + aOff + "aSize: " + aSize);
}

function serialError(err) {
// print('serialError ' + err);
}

function portClose() {
// print('portClose');
}