Post

A POST DEFINITION file is a unique translation document, defining multiple variables and lines of code that are specific for Computer Numeric Controlled Equipment. Think of this as a dictionary, of sort.

A POST PROCESSOR creates, arranges, and formats lines of code between CAD Geometry, CAM Operation settings and the Post Definition File.

Commonly referred to as the “POST“, this is the final-formation of code, that guides the CNC Equipment based on the previously prepared CAD & CAM settings defined by the user.

(CAD + CAM + POST DEFINITION) + (POST PROCESSOR) = POST

From the Machining Operations Browser, the Post Definition File can be adjusted by double-clicking one of the following:

1. POST: Located as the second option down, from the PROGRAM tab, directly below the MACHINE option, int the MACHINE SETUP bar.

2. POST – XXXX: Located as the second option down, from the MACHINING JOB Tree, directly below MACHINE – 3-AXIS & above STOCK – NONE.

1. FOLDER: Begin by browsing to the folder, where the recently downloaded Post Definition file is located.

2. CURRENT POST PROCESSOR: IF there is more than one Post Definition file in the previously selected folder location; select the drop-down arrow to select the correct Post Processor.