Month: February 2022Page 2 of 3
Sample 1 For my first sample I recreated the pyramid shaped inflatable from aeroMorph. One of the seams near the base of the pyramid popped, so one side…
Assignment 5 – Michelle Murray 2/10/22 Here is a preview of the three samples I have decided to submit for this assignment: Sample 1 Sample 2 Sample 3…
. . Pneumatic Pyramid “Create hole for valve at crosshair. Be sure to only puncture one side of the pouch. Seal along the solid lines to create pyramid…
Existing Example: For this sample, I wanted to recreate the cube example from MIT’s aeroMorph. It can be found using this link: https://www.youtube.com/watch?v=K5NWgy4aTPU I used the impulse sealer for…
cube design by aeromorph I followed aeromorph’s cube design for my first sample. I used solder for the entire sealing, and that seems to have caused a hole…
Originally, I wanted to create the circle areomorph from MIT media lab because of its ability to stand. However, it was much more difficult than I thought due…
Carolyn Youstra aeroMorph Pyramid (Existing Example) Who knows what it is… (My own design!) “The claw that actually works” (Extended Example): Instructions: On a double sided plastic sheet,…
By: Natalia Santiago Existing Example taken from aeroMorph – Pyramid Actuator I decided to recreate the pyramid design created by aeroMorph. Originally I wanted to make the whole…
Yumeng Zhuang Existing example taken from Aeromorph https://tangible.media.mit.edu/project/aeromorph/ It’s noticeable that the hinges don’t have directions, so I need to manually bend it to the proper end shape….
Recreating an example – aeroMorph hinge I chose to recreate one of the hinges from aeroMorph because I liked how simple the design was and wanted to see…