Final Project Pattern – Franky Moore

This was a bit difficult due to the waistband and my choice to remove the back dart. I am using a straight waistband based on a favorite pair of jeans, and forgot to add 4 cm of underwrap but will do so on the sloper. I removed the single back dart by removing 3/4 cm on the side seam and CB from the top of the waistband and made sure that the inseam and side seam for the back went down the length of the dart. I also added 4 cm crutch ease, which differed from the proposed 1 cm crutch ease on the 1/4 sloper.

I also used the numbered pattern paper instead of the brown paper. I can redraw with the pattern paper if necessary.

Adjusted Slopers pt. II – Sarah Xi

Visual Portfolio, Posts & Image Gallery for WordPress

I finally finished adjusting my slopers! Here are some changes from last time:

  • Brought the armscye down by a lot so it was less tight
  • Opened up the top part of sleeve since I took in 1 cm from center last time it was too tight all the way through.
  • Leveled the bodice at the bottom (waist line) (I realize now that I took the pictures before I trimmed it)
  • Tucked in 6cm from hip horizontally so waist to crotch length is shortened.

I almost done ripping the seams out of everything so the new sloper paper templates are coming soon.

Sewing Sample – Set 3

I chose to follow the Advanced Track

I felt pretty confident with most of these, but I really struggled with understitching #3.